A complete above ground rainwater harvesting systems.
Combining the rainwater tank, filter collector, submersible pump and pump to turret connector.
Chosen by irrigation professionals and homeowners alike.
The Rainwater Tank
Versatile, space-saving design and enormous 1500 Litre capacity. The Utility Tank is suited to a wide range of rainwater harvesting and water storage applications. Used widely in plant rooms for various applications. Comes with a large removable lid.
It can fit through doorways and down staircases for ease of access to basements and difficult spaces. Removable lid. Superb industrial strength & proven durability.
The Utility Tank comes with:
2 x 3⁄4” BSP, Metal Threaded Ports,
2 x DN50 (2”) Sealed Ports.
3 x Marked Inlet / Overflow Points
1 x Removable Lid
The 3P Filter Collector
The class-leading ‘3P Filter Collector’ is a universal filter/collector/diverter that is easily installed onto most downpipes from 65mm – 75mm square and from 68mm – 110mm round.
The filter/collector is easily connected to the water tank with the use of the accessories which are provided.
The filter/collector removes leaves, grit and other debris from the incoming rainwater before diverting it into the water tank for the best possible tank water quality. Once the water tank is full the filter/collector acts as the water tanks overflow. It can also be turned off to stop diverting rainwater into the water tank.
Thanks to the filter/collector’s unique high-quality design its stainless steel mesh filter (located in the durable plastic body) is easily and quickly cleaned. Just remove, rinse and replace.
The Water Pump
The Calpeda GXRM9FG submersible pump is built in Italy with quality Eu components.
It has minimum dimension and high levels of performance.
Max head up to 9 m and max flow rates up to 160 L/min.
It is an open single-impeller submersible pump in chrome-nickel stainless steel and comes with 10m Cable and 3-pin plug…
The motor is water-cooled by the pumped water passing between the motor jacket and the external jacket.
It comes with a magnetic float switch that ensures the pump will turn off when the water level gets too low.
The pump is positioned inside the tank, on the tank floor. It is connected to the tank via the pump to turret connector. The tank to turret connector can be connected to the top of the tank with the use of the hole-saw provided.
If you need to position your water tanks farther away from the downpipe we also recommend a ‘Universal Long Link Kit’ available to purchase from the dropdown menu above.