A complete above ground rainwater harvesting systems: combining the Tank, Filter Collector, Automatic Garden SteelPump and Pump to Tank Connector.
Chosen by irrigation professionals and homeowners alike.
The slim and sleek rainwater wall tank is made of high-quality PE (Polyethylene) and has an 800 Litre capacity. Specified by professionals where bulk storage and a compact footprint are required. It has an original and class-leading design. 36kg shot weight, walls 8mm thick. Inter-linkable. 3/4” BSP Metal threads.
The tank comes with three metal threaded ports. One is positioned on the front of the tank for the plastic tap ( included ) the other two are positioned on either side at the base of the tank which can be used as a drainage port, to connect tanks together or to attach the Garden Steel Pump ( included ).
Available in four attractive colours :
The 3P Filter Collector
The class-leading ‘3P Filter Collector’ is a universal filter/collector/diverter that is easily installed onto most downpipes from 65mm – 75mm square and from 68mm – 110mm round.
The filter/collector is easily push-fit connected to the water tank with the use of the accessories which are provided.
The filter/collector removes leaves, grit and other debris from the incoming rainwater before diverting it into the water tank for the best possible tank water quality. Once the water tank is full the filter/collector acts as the water tanks overflow. It can also be turned off to stop diverting rainwater into the water tank.
Thanks to the filter/collector’s unique high-quality design its stainless steel mesh filter (located in the durable plastic body) is easily and quickly cleaned. Just remove, rinse and replace.
This powerful, intelligent and robust automatic Garden SteelPump XAJE80P is in our opinion one of the safest and quietest pumps in its class. It starts and stops pumping automatically with water demand.
Max head up to 40 m and max flow rates up to 50 L/min.
The pump is also submersible so it is waterproof (IP68) and very safe to use in the garden it has dry-run protection and comes with a serviceable inlet, non-return valve and a carrying handle as standard.
It is externally connected to the tank via one of the 3/4” BSP Metal threaded ports at the base of the tank with the use of the pump to tank connector ( included )
If you need to position your water tank farther away from the downpipe, we also recommend a ‘Push-Fit Long Link Kit’ available to purchase from the dropdown menu above.
Looking for a larger capacity above ground rainwater harvesting system?