A complete compact cold water booster set and break tank, variable speed, constant pressure cold water booster set, and break tank.
800-Litre cold water storage tank.
Typical duty: 90 L/Min @ 3.5 Bar
All programmed, tested, and ready to go!
This water pressure booster system has been specifically designed to supply potable water to homes where the mains pressure is insufficient.
It comes complete with variable speed control and a powerful submersible WRAS approved pump.
The Break tank is a high-grade MDPE for potable water.
It is ideal for single developments with high usage.
The electronic controller will automatically start and stop the pump when a drop in pressure is sensed i.e., a tap or outlet is opened and closed.
The Booster Pump
The state-of-the-art WRAS approved pumps that are built to last. Double mechanical seals and stainless steel housing, guarantee a long service life.
The Pump Controller
The incorporated E-Series variable speed pump controller continually varies the pump motor speed to match the changing flow demand pattern, whilst maintaining constant system pressure.
This mode of operation, adjusting the pump’s motor speed to the building’s flow requirements, reduces the power consumption, and extends the pump’s life dramatically.
The pump controller is mounted in the discharge pipework. The body is constructed from a techno-polymer suitable for potable water applications.
It has an LCD display to indicate system overview and operating parameters. Complete with dry running, over temperature and over current protection and alarms.
The Break Tank
800-litre nominal capacity and manufactured using high-quality polyethylene.
It is fitted with a 1/2″ BSP inlet, 2 x 1 1/2″ outlets, and a 22mm overflow.
It has an insulation jacket as an optional extra.
This booster set must be installed undercover, protected from the weather and freezing.
• Conveyed water temperature 0 – 50°C
• Max relative humidity 50% at +40°C
Delivery To Site
This cold water booster set and break tank will be delivered to site on a pallet with a large delivery lorry (average dimensions, length 10.5 meters x width 2.5meters x height 4 meters).
However, if your delivery access is restricted and/or isn’t suitable to accept a large lorry. Please contact us to have your booster set delivered on a smaller vehicle for an additional cost.
In both cases, the system will be delivered on a pallet to the curbside. It is the customer’s responsibility to move the system from this point to where it will be installed/stored.