merry christmas from total water systems

Mac 3, Quardi, Pump Controller

All images shown are for illustration purposes only

From £249.99

Free UK Mainland Delivery

(Please click here for details)

Clear
SKU N/A Categories ,

Description

The Mac 3 Quadri pump controller has adjustable parameters for use in 1 or 2 pump systems.

  • Automatic or Manual Operation
  • LCD Information Display
  • Adjustable Parameters
  • High-Quality Components
  • Durable ABS Construction
  • Pump Balancing, shares the work between two pumps (2 pump model only)
  • Flexible: For Boosting, Storage and Sewage Pump Control
  • IP55 Rated

How Does It Work?

The Mac3 Quadri is a direct on-line starter and pump controller for use with single and three-phase systems.

The Quadri can control up to two pumps depending on the model and is able to balance the workload by alternating the starts of each pump (unless demand requires both pumps be activated simultaneously). The Quadri uses float switches/level probes and/or pressure switches to determine if single or both pumps are required.

This controller functions in an automatic or manual configuration.

Automatic configuration allows the Quadri to test the connected hardware, determine the correct input/output levels, and then operates within them.

The configuration allows the user to pre-set the following operating parameters:

● Wait filling time

● Motor start delay duration

● Maximum motor current ( over-current protection)

● Minimum and maximum operating voltage

Operational parameters can be viewed on the LED’s and edited on the potentiometers on the circuit board. This allows the Quadri to display system information such as:

● The operational status of the motor

● Error messages

● Defined parameters of operation

The Quadri can run in three modes:

● Boosting

● Storage

● Sewage

Boosting allows the Quadri to function with a pressure boosting system, using both probes and pressure switches to monitor and run pumps when a pressure or level drop is detected.

Storage allows the Quadri to monitor the levels in two tanks, and function as a level controller.

Sewage allows the Quadri to use float switches to determine levels inside a tank and pump according to the parameters set by the installer.

Technical Information

Physical

Single Phase

Three Phase

Width

285 mm

Length

345 mm

Height

165 mm

Weight

2.5 Kg

4 Kg

Material – Body

ABS

Electrical

Power Supply

230Vac (±10%)
50 – 60Hz Single Phase

380Vac (±10%)
50 – 60Hz Three Phase

Current Range

2 – 18 A

0.8 – 14 A

Pump Protection

Ammetric (Adjustable For Each Pump Connected)

Power Of Pump

Single Pump Model

0.37kW – 2.24kW (0.5 hp – 3 hp)

0.37kW – 3.72kW (0.5 hp – 5 hp)

Twin Pump Model

0.37kW– 2.24kW (0.5 hp – 3 hp)

0.37kW – 6.5kW (0.5 hp – 9 hp)

Errors Display

LED’s

Keypad

Membrane

Fault detection

Yes

Inputs

Level Regulator / Float Switch, Pressure switch

Outputs

Alarm Output Relay

Environmental

Ingress Protection Rating

IP55

Storage Temperature

-20 – 80 oC

Operating Temperature

-5 – 40 oC