The SuperSimplex M electromechanical pump controller. Pump pressure switch for use with float switch input for dry run protection
- 1” (25mm) BSP In-Line Fitting
- Simple Installation
- Single Phase
- Clean Water Only
- Vertical or Horizontal Mounting
How Does It Work?
Mac3 SuperSimplex M is an electromechanical pump pressure switch with adjustable restart pressure.
By simply using the large dial, the restart pressure can be tailored to suit the requirements of the installation. When the pressure had dropped below the restart pressure, the pump will be activated. SuperSimplex M deactivates the pump at approximately 1.5bar above the restart pressure.
This controller can control a single-phase pump of up to 2 Hp (1.5kW).
It is mounted on-pipe with a 1” (25mm) threaded male connector on the input side and a female connector on the output, allowing the unit to be mounted either vertically or horizontally as required. The inlet connector also houses a removable mesh filter.
It allows the addition of an external float switch to prevent the pump from running dry.
Designed for use with clean water only.