A complete micro sewage pumping station 450-litre with a 50mm (2″) vortex or macerator pump.
Chamber Dimensions: 610mm Diameter x 1500mm Depth
Designed for an easy and trouble-free installation.
The micro sewage pumping station 450-litre is delivered to site as a complete package, including all internal pipework, fittings and a sewage pump. It is used where gravity drainage isn’t possible.
It is designed to collect sewage / grey water and pump it into the main sewer. Ideal for collecting foul water from a W.C, utility room, etc.
450-litre underground storage tank, complete with a pedestrian rated cover and anti floatation flange. Manufactured in high-grade polyethylene.
Inside the tank, there is the vortex or macerator pump complete with float switch; the pre-installed 50mm (2″) PVC pipework and none return valve.
The tank has a 40mm cable duct designed to accept 40mm standard low-pressure push-fit pipe.
A 110mm inlet seal is provided with the tank; however, the 110mm inlet itself has to be drilled on-site by the installer.
The discharge pipe is terminated outside the tank in a 50mm (2″) BSP male thread. Designed to accept:
- 50mm (2″) standard solvent weld discharge pipe (not included).
- 50mm (2″) to 63mm MDPE compression pipe fitting (not included) to enable connection to 63mm flexi pipe.
The Sewage Pump
This sewage pumping station has three pump options:
- Vortex 6-meter lift, 50mm (2″) solids handling capacity
- Vortex 10-meter lift, 50mm (2″) solids handling capacity
- Macerator 16-meter lift, 50mm (2″) solids handling capacity
All of the pumps in these systems are heavy-duty and made to last. Built with cast iron pump casings and stainless steel motor housings. They are coolant filled with mechanical seals. Complete with a float switch and 10 meters of cable.
The pumping station is delivered complete with the components as listed.
If you can’t find what you are looking for or require further information, please contact us.
We will be happy to help!