A complete mini micro sewage pumping station with a 190-litre chamber and 50mm (2″) vortex or macerator pump.
Chamber Dimensions: 610mm Diameter x 635mm Depth
Designed for an easy and trouble-free installation.
Our mini micro sewage pumping station 190-litre is our smallest pumping station. It is delivered to site as a complete package, including all internal pipework, fittings and a sewage pump. It is used where gravity drainage isn’t possible.
It is designed to collect sewage / grey water and pump it into the main sewer. Ideal for collecting foul water from a W.C, utility room, etc.
190-litre underground storage tank, complete with a pedestrian rated cover and anti floatation flange. Manufactured in high-grade polyethylene.
Inside the tank, there is the vortex or macerator pump complete with float switch; the pre-installed 50mm (2″) PVC pipework and none return valve.
The tank has a 40mm cable duct designed to accept 40mm standard low-pressure push-fit pipe.
A 110mm inlet seal is provided with the tank; however, the 110mm inlet itself has to be drilled on-site by the installer.
The discharge pipe is terminated outside the tank in a 50mm (2″) BSP male thread. Designed to accept:
- 50mm (2″) standard solvent weld discharge pipe (not included).
- 50mm (2″) to 63mm MDPE compression pipe fitting (not included) to enable connection to 63mm flexi pipe.
The Sewage Pump
This mini micro sewage pumping station has three pump options:
- Vortex 6-meter lift, 50mm (2″) solids handling capacity
- Vortex 10-meter lift, 50mm (2″) solids handling capacity
- Macerator 16-meter lift, 50mm (2″) solids handling capacity
All of the pumps in these systems are heavy-duty and made to last. Built with cast iron pump casings and stainless steel motor housings. They are coolant filled with mechanical seals. Complete with a float switch and 10 meters of cable.